Room and Power Check — For Gyms, Studios, Spas and Hotels

Plan Your Room

The decision, made safe.

Tell us about the space, the power and the way in. We check Room Fit — Power — Water and Drain — Floor and Space — Delivery Path for every unit you are weighing, against what each manufacturer calls for, and confirm the maker's terms for commercial use before we quote.

Free — Written Reply Within 2 Business Days
Tell Us Your Space

Your Facility, and We Take It From There

Rough numbers are fine, and Not Sure is a fine answer. Your facilities lead or the last electrician's notes cover most of it. Photos of the room, the doorway, the panel and the delivery entrance help; reply to our email with them.

Prefer a hard copy? Fill in the PDF and email it to support@motiontheorylabs.com. Download the Fillable PDF

The Facility
Facility Type
The Room
Where Will It Go

Not Sure is fine on any of these. A filled plunge can weigh well over 1,000 lb, so we flag the weight each maker lists and your building engineer or landlord confirms the floor.

Power
Voltage at the Panel

We set what you have against the circuit each manufacturer calls for, per unit. A licensed electrician confirms the install.

Water and Drain
Water Supply Near the Spot
Drainage
The Way In
Loading Dock
The Plan
Hours Open per Day
Who Uses It

Circuit requirements come from the manufacturer's specs. A licensed electrician does the install, and we tell you what to ask them. We never share your details.

What You Get Back

A Written Check in Five Parts

Room Fit — Power — Water and Drain — Floor and Space — Delivery Path, for every unit. Manufacturer facts are marked as theirs, what you told us is marked as yours, and the questions for your electrician are set apart so you can forward them.

  1. Room Fit — Each unit's footprint against your length and width, its height against your lowest ceiling point, and how many fit with the clearance the maker asks for.
  2. Power — The voltage, amps and dedicated circuit each manufacturer calls for, totaled across every unit, set against your panel, and the questions to put to a licensed electrician.
  3. Water and Drain — How each plunge fills and drains, how much water it holds, and whether the room's supply and drain cover it.
  4. Floor and Space — The weight each maker lists, empty and filled, against your floor, plus indoor or outdoor rating and the clearance around each unit.
  5. Delivery Path — What arrives on a pallet, the size of the largest piece, and whether it clears your dock, doors, stairs and elevator.

Then the options that fit your space and your hours — across brands — with the one we would pick, and why.

We are an authorized dealer for every brand we carry, and we confirm each maker's commercial-use terms in writing before we quote. If nothing we carry fits your facility, we say so. We read the spec sheet for you; we do not assess your wiring.